UNIT 5:FOSSIL, NON FOSSIL FUEL AND POWER PRODUCTION
Most of the energy that we consume comes from fossil fuels. Coal, petroleum and
natural gas are called fossil fuels. Millions of years ago, during the carboniferous
age, due to the change in atmospheric conditions and other changes, the forests
were destroyed and they were fossilized.
With the action of bacteria and other microorganisms on the surface of the
earth, these trees and other vegetations were decayed and disintegrated. Years
after these trees were available in solid, liquid and gaseous state. The solidform is coal. It is the most widely used form of fossil fuel for domestic purposes.
5.1.1. Fossil fuel
History of usage of Fossil Fuel
Before steam engines were invented, heavy industry depended on mechanical
water power to grind flour, saw wood, and so forth. Industrialization led to a
higher rate of energy usage. Fossil fuel led to development and it played a crucial
rule as energy sources, inputs for agriculture, and feed stocks for chemical
manufacture. The Industrial Revolution marked a big change for people of the
world.
Many of the agriculture based societies that used human and animal labor forces
switched to use machines to do work. Coal was commonly used in the early era
of industrialization until internal combustion engine and the automobile wereinvented. Oil and gas became the most common fossil fuel people used.
Fossil fuels are hydrocarbons, primarily coal, fuel oil or natural gas, formed
from the remains of dead plants and animals. In common dialogue, the term
‘fossil fuel’ also includes hydrocarbon-containing natural resources that are not
derived from animal or plant sources.
Coal, oil and natural gas are called ‘fossil fuels’ because they have been formed
from the fossilized remains of prehistoric plants and animals. Fossil fuels are
non-renewable energy source since they take millions of years to form. They
ultimately get their energy from the sun.
Types of Fossil Fuels
• Coal
Coal is a hard, black colored rock-like substance formed when dead plants were
subjected to extreme heat and pressure for millions of years. Coal is formed
through coalification. Coal is made of decomposed plant matter in conditions
of high temperature and pressure. Its formation is similar to oil’s but it takes
less time to form.
It is made up of carbon, hydrogen, oxygen, nitrogen and varying amounts of
sulphur. There are two ways to mine coal: surface mining and underground
mining.
• Natural Gas
Natural gas is formed from the remains of tiny sea animals and plants that
died millions of years ago. The gas then became trapped in layers of rock-like
water in a wet sponge. Raw natural gas is a mixture of different gases. Its main
ingredient is methane. The strange smell of natural gas (like rotten eggs) comes
from a chemical added by the companies.
• Oil (Petroleum)
Oil is formed from the remains of animals and plants that died millions of years
ago. The organic material was then broken down into hydrogen and carbon
atoms and a sponge-like rock was formed, full of oil.
Oil cannot be used as it is when it is drawn from the ground. Oil refineries clean
and separate the oil into various fuels and by products. The most important ofthese is gasoline.
Uses of Fossil Fuels
The main systems of fossil fuels are the steam cycle and the gas turbine
cycle. Fossil fuels are used to generate electrical energy in a series of energytransformations. The following is an example:
Advantages of Fossil Fuels
1. Can be easily transported via pipelines, railroads, trucks and ships.
2. They are easily available. More and more extractions are occurring all over
the world and therefore resulting in a large amount of readily available
energy sources.
3. Oil refineries close to the sea have easy access to shipping.
4. Fossil fuels are easily combustible. In other words, they produce larger
amounts of energy.
5. Creates infrastructure jobs for the surrounding communities.
6. Much of our infrastructure is designed to run using fossil fuels.
7. Although fossil fuels are considered as a relatively new energy source, in
reality they have been around for hundreds of years.
8. Every machine that is not run by electricity uses fossil fuels. Vehicles,
machines, devices, etc. are powered by coal, petroleum or natural gas.
9. They are considered to be very stable.
10. They are easy to set up. Since fossil fuels are easily available, their power
plants can be constructed anywhere in the world. They are also easier
to extract and process, as well as capable of producing large amounts of
energy at a single location.
11. Fossil fuels are easy to store and transport because they are so stable. They
are easily distributed.
12. Easy transportation allows countries around the world to enjoy affordable
power.13. The price of fossil fuels is inexpensive compared to other sources of energy.
Disadvantages of Fossil Fuels
Fossil fuels, for all their pros, have many cons that have major concerns for
human being, animals and the environment.
The biggest disadvantage of fossil fuels is the air pollution that many are
claiming is causing global warming.It is claimed that with global warming, the
Earth’s climates are changing. Below is a list of the disadvantages of fossil fuels.
1. Air Pollution and its effects on the Earth and environment. This includes the
concepts of global warming and climate change.
2. They are non-renewable sources of energy. As fossil fuels are extracted to an
unlimited level, they would surely deplete one day. They are non-renewable,
so it is likely that when fuel reserves have been completely used up, there is
nothing more left. It wouldtake millions of years to replace them. They are
on a limited amount, and we are not actually sure where that limit is.
3. Pipelines transporting fossil fuels spoil the natural beauty.
4. They affect marine life through oil spills. Fossil fuels, being needed to be
transported to their processing plants via land, air and water poses a threat
to the environment. The process can involve leaks in oil tankers or ships
getting drowned deep under the sea. The crude oil contains some toxic
substances that, when mixed up with water, pose serious hazards to marine
life.
5. Risk of political issues and terrorism
6. Most facilities that are powered by coal require large quantities of coal to
have on hand for use. Storage facilities for the coal are required, this can be
pricey.
7. Coal mining is a very dangerous and many workers have been killed in the
mines as well as becoming ill with lung diseases after working the coal
mines.
8. While fossil fuels are relatively inexpensive, the prices are rising due to
Middle Eastern countries holding large reserves of oil such as petroleum.
9. Coal mining has created destroyed lands and the mines are creating hazards
in the event of natural disasters.
10. They need huge amounts of reserves. Coal power plants for example need
regular and huge supply of resources to produce large amounts of electricity
on a constant basis, which means they need reserves to carry out their
operations.
11. The extraction of natural gas is leaving large craters within the Earth’ssurface.
5.1.2. Non fossil fuel
Non fossil fuels are alternative sources of energy or renewable source of energy
that do not rely on burning up limited supply of coal, oil or natural gas. They
should generate power that can be utilized indefinitely. They include sun light,
wind, hydro, tidal and waves from water, geothermal all of them generateenergy.
Non-fossil fuels are considered to be extremely important for power creation.
This is because they are usually renewable energy sources that could be tapped
for hundreds of years and not run out. In addition, energy production using
non fossil-based fuels usually generates much less pollution than fossil-basedenergy sources.
It is easy to think that the advantages of fossil fuels outweigh their disadvantages.
All over the World, Fossil fuels are gaining popularity as energy sources because
they are relatively inexpensive and look like clean. Remember that fossil fuels
are comprised of three substances: coal, oil and gas. In the following lines we
are going to discuss some of the common advantages and disadvantages of
fossil fuels transportation and storage.
5.2.1. Advantages associated with transportation and storage of
fossil fuels
- The majority of oil transported by maritime means reaches their
destination. Normally there are no serious oil spillages. In fact, as soon as
the pipeline is damaged by accident or sabotage, pumping is stopped and
pollution remains limited.
- Oil depots are usually situated close to oil refineries or in locations where
marine tankers containing products can discharge their cargo.
- The long life of the permanent assets, relatively trouble-free operation
with minimum maintenance, the large-volume shipments that are
possible, the high mechanical efficiencies that are obtained with low
rolling resistances.
- The total costs of moving slurry during the life of the line do not increase
in proportion to inflation. The advantage over rail and truck transport is
clear, as the costs of these latter modes escalate with inflation.
- Taller and wider stockpiles reduce the land area required to store a set
tonnage of coal. Larger coal stockpiles have a reduced rate of heat lost,
leading to a higher risk of spontaneous combustion.
- Waterways are usually circuitous, resulting in slow delivery times.
However, transport of coal on barges is highly cost-efficient.
- Transportation by gas pipelines are less costly and are thus more common.
5.2.2. Disadvantages associated with transportation of fossil fuels
- At sea, the relative disadvantages derive from the possibilities of oil spills
and discharging of polluting products such as the residue from tank and
bilge cleaning.
- Oil is always corrosive to a greater or lesser extent, because it contains
acidic gases. The pipes deteriorate from the inside and if they are not
changed in time, they finish by leaking.
- The construction of major pipelines crossing several countries requires
intense negotiation.
- On the other hand, slurry pipelines involve potential environmental
problems. Water requirements are substantial: almost one ton of water is
needed to move one ton of coal.
- Even though pipelines are useful, in certain cases the construction of gaspipelines is technically impossible or too expensive.
Fossil fuels have been formed from the organic matter: these are remains of
long-dead plants and animals. They contain a high percentage of carbon and
hydrocarbons. Primary sources of energy we are using in our country and
around the world in particular include petroleum, coal, and natural gas, all
fossil fuels. With the needs increase of energy, the production and use of these
fossil fuels create serious environmental concerns. Until a global movement for
renewable energy is successful, the negative effects of fossil fuel will continue.
5.3.1. Climate Change and Global Warming
Global warming occurs when carbon dioxide is accumulated in the atmosphere.
Carbon monoxide is produced by the combustion of fossil fuels and converted
into carbon dioxide. These gases trap more sunlight; therefore, less light is
reflected back into space. They are called Greenhouse Gases, because the
effect is like being in a plant glasshouse, or in a car with the windows wound
up. As a result, the surface temperature of the earth is increasing drastically.
If the increase is enough it will distress the ecological systems. The
consequences are: severe weather, droughts, floods, drastic temperature
changes, heat waves, and more severe wildfires. Food and water supplies
are also threatened. Tropical regions will expand; allowing disease-carrying
insects to expand their ranges.
5.3.2. Hole in the Ozone Layer
Ozone is a gas in the Earth’s upper atmosphere whose chemical formula is O3
Ozone acts to block out much of the sun’s ultraviolet radiation which causes
skin cancer and contributes to the fluctuations of global climatic conditions
that affect the environment.
However, the World is facing a serious confrontation as the emissions of
chlorofluorocarbons and other destructive gases are causing ozone holes to
appear in the stratospheric ozone layer. As a consequence, the concentration of
detrimental ultraviolet radiation is increasing at ground level and jeopardizing
humans, crops and ecosystems.
5.3.3. Acid rain
Acidic rain, which is made up of several acidic compounds, forms when sulfur
dioxide and nitrogen dioxide react in the air with water, oxygen and other
chemicals. The wind carries the acidic compounds into the air, and they later
fall to the ground in either dry or wet form.
They form an acidic ‘rain’ which can destroy vegetation. Some of these gases
are from natural sources, such as lightning, decomposing plants and volcanoes.
However, much of these gases are the result of emissions from cars, power
stations, smelters and factories.
The effects of acid rain are as follows :
- Acidification of lakes, streams, and soils .
- Direct and indirect effects (release of metals, for example: Aluminum
which washes away plant nutrients).
- Killing of wildlife (trees, crops, aquatic plants, and animals).
- Decay of building materials and paints, statues, and sculptures .- Health problems (respiratory, burning- skin and eyes)
5.3.4. Air Pollution
Air pollution is the release of excessive amounts of harmful gases (e.g. methane,
carbon dioxide, sulphur dioxide, nitrogen oxides) as well as particles (e.g. dust
of tyre, rubber, and lead from car exhausts) into the atmosphere. Areas of
high air pollution indexes have populations with higher rates of asthma than
cleaner environments do.
5.3.5. Changes in Food Supply
Changing weather affects the agricultural industry and the human food supply.
Carbon emissions contribute to increasing temperatures and decreasing
precipitation, changing the growing conditions for food crops in many areas.
Major changes in crop yield will cause food prices to rise around the world.
In addition, climate change influenced by carbon emissions forces animals,
many of which are hunted as food, to migrate to higher altitudes or northern
habitats as the climate warms.
5.3.6. Water Pollution
1. Sewage is the household waste water. Many detergents contain phosphates
which act as plant fertilizers. When these phosphates and the sewerage reach
rivers, they help water plants to grow in abundance, reducing the dissolved
oxygen in the river water.
2. Biodegradable detergents are more environment-friendly because they are
readily broken down to harmless substances by decomposing bacteria.
3. Suspended solids in water, such as silt reduce the amount of light that reaches
the depths of the water in lakes and rivers. This reduces the ability of aquatic
plants to photosynthesise and reduce the plant and animal life. Turbidity is
the measure of ‘cloudiness’ or the depth to which light can reach in water.
5.3.7. Population Explosion
It is the rapid increase in population in developing countries causing famine,
and also in developed countries causing more demand for energy and withthat, it increases pollution and destruction of the environment.
Study the figure 5.3 and try to respond to the following questions:
i) Predict and write down what is observed in the picture above
ii) Do you think that the picture above produces food? Explain your
reasoning.
iii) The power Plant ejects big amount of smoke in the atmosphere.
What kind of combustibles do you think are used there?
iv) Apart from the gaseous smoke ejected, discuss other problemsmet during the production of energy using fossil fuel.
5.4.1. Nuclear fuel and nuclear fission
Nuclear fuel is any material that can be consumed to derive nuclear energy.
The nuclear fuel can be made to undergo nuclear fission chain reactions in a
nuclear reactor. The most common nuclear fuels are 235U (uranium 235) and
239Pu (plutonium 239). Not all nuclear fuels are used in fission chain reactions.
Nuclear fission is a process, by which a heavy nucleus splits into two or moresimpler pieces. This process releases a lot of energy.
When a neutron strikes an atom of uranium, the uranium nucleus splits into
two lighter atoms and releases heat simultaneously. Fission of heavy elements
is an exothermic reaction which can release large amounts of energy both as
electromagnetic radiation and as kinetic energy of the fragments.
A chain reaction refers to a process in which neutrons released in fission
produce an additional fission in at least one further nucleus. This nucleus in
turn produces neutrons, and the process continues. If the process is controlledit is used for nuclear power or if uncontrolled it is used for nuclear weapons.
5.4.2. Controlled fission (power production) and uncontrolled fission
(nuclear weapons)
Nuclear fission is based upon the release of neutrons during the reaction. If
more than one neutron is released for every fission reaction it will accelerate,
less than one it will decelerate.
Of the three neutrons, liberated during a fission reaction, only one triggers a
new reaction and the others are simply captured. The system is in equilibrium.
One fission reaction leads to one new fission reaction, which leads to onemore, and so on. This is known as controlled fission.
In an uncontrolled fission reaction (weaponry) the appropriate amount of 235U
is simply mixed with a moderator, making the reaction go out of control. As the
reaction is out of control, the exponential acceleration of the reactions creates
massive amounts of energy.
This can be kept from going off by keeping the moderator and the 235U separate,
both below critical mass, until the desired time of explosion. In a controlled
reaction there is a higher proportion of 238U to ease the reaction.
However, this is difficult to control as the reaction becomes faster or slower. To
counteract this, control rods, made of neutron absorbing materials (i.e. Boron)
are added or removed between each fuel rod.
5.4.3. Problems associated with the production of nuclear power
- The problem of radioactive waste is still unsolved. The waste from nuclear
energy is extremely dangerous and it has to be carefully looked after for
several thousand years.
- High risks: Despite a generally high security standard, accidents can still
happen. It is technically impossible to build a plant with 100% security.
A small probability of failure will always last. The consequences of an
accident would be absolutely devastating both for human beings and the
nature.
- The more nuclear power plants (and nuclear waste storage shelters) are
built, the higher is the probability of a disastrous failure somewhere in
the world.
- During the operation of nuclear power plants, radioactive waste is
produced, which, in turn, can be used for the production of nuclear
weapons.
- Nuclear power plants could be preferred targets for terrorist attacks.
Such a terrorist act would have catastrophic effects for the whole world.
- The energy source for nuclear energy is Uranium. Uranium is a scarce
resource; its supply is estimated to last only for the next 30 to 60 years
depending on the actual demand.
- The timeframe needed for formalities, planning and building of a new
nuclear power generation plant, is in the range of 20 to 30 years in the
western democracies. In other words, it is an illusion to build newnuclear power plants in a short time.
5.5.1. Nuclear Meltdown
A nuclear meltdown is an informal term for a severe nuclear reactor accident
that results in core damage from overheating.
A nuclear meltdown occurs when a nuclear power plant system or component
fails so the reactor core becomes overheat and melts. Usually, this occurs due to
the lack of coolant that decreases the temperature of the reactor. The commonly
used coolant is water but sometimes a liquid metal, which is circulated past the
reactor core to absorb the heat, is also used.
In another case, a sudden power surge that exceeds the coolant’s cooling
capabilities causes an extreme increase in temperature which leads to a
meltdown. A meltdown releases the core’s highly radioactive and toxic elementsinto the atmosphere and environment.
The causes of a meltdown occur due to:
Loss of pressure control: The loss of pressure control of confined coolant may
be caused by the failure of the pump or having resistance or blockage within
the pipes. This causes the coolant to cease flow or insufficiency flow rate to the
reactor; thus the heat transfer efficiency decreases.
Loss of coolant: A physical loss of coolant, due to leakage or insufficient
provision, causes a deficit of coolant to decrease the heat of the reactor. A
physical loss of coolant can be caused by leakages. In some cases, the loss of
pressure control and the loss of coolant are similar because of the systematic
failure of the coolant system.
Uncontrolled power excursion: A sudden power surge in the reactor is a
sudden increase in reactor reactivity. It is caused by an uncontrolled power
excursion due to the failure of the moderator or the control that slows down
the neutron during chain reaction. A sudden power surge will create a high
and abrupt increase of the reactor’s temperature, and will continue to increase
due to system failure. Hence, the uncontrollable increase of the reactor’s
temperature will ultimately lead to a meltdown.
5.5.2. Nuclear (Radioactive) Wastes
Nuclear wastes are radioactive materials that are produced after the nuclear
reaction. Nuclear reactors produce high-level radioactive wastes. The wastes
must be isolated from human contact for a very long time in order to prevent
radiation.
Short- and long-term storage of spent nuclear fuel has been a challenge for
the industry and policymakers. Spent fuel, if not disposed of properly, could
contaminate water supplies or be used by terrorists to create a dirty bomb. In
the short-term, spent fuel is stored in pools on-site--but they only need to stay
there a few months until they are cool enough to move to dry storage (either on
site or in a long-term storage facility). Still, at some plants, fuel rods are packed
in pools in numbers well above design specifications and stay in the pools long
after they are ready to be moved
Efforts to reprocess nuclear waste are expensive and come with associated
environmental and security risks. Yet a growing number of countries--including
Japan and Russia--have begun fuel recycling projects.
5.5.3. Security Issues
Most countries either pursuing nuclear power or currently using it have signed
on to the Nuclear Nonproliferation Treaty and have agreed to comply with
rules that ensure that they will not use nuclear technologies toward making
weapons. However, any country with nuclear technology is considered a
proliferation risk.
a) It is becoming cheaper to produce photovoltaic cells
b) Solar energy can currently replace all of the energy created by
fossil fuels
c) Most solar panels convert more than 25% of the light that strikes
them
4. Identify three technological challenges that limit the use of solar
power in Rwanda.
a) Weight, cost, toxicity
b) Aesthetics, toxicity, efficiency
c) Storage, weight, fragility
d) Cost, storage, efficiency
5. Which of the following is NOT utilized in the process of harnessing
solar energy?
a) Gas
b) Mirrors
c) Steam
d) Photovoltaic cells
6. Which issues would better energy storage technologies help solve?
a) Inconsistent energy demands
b) Inconsistent power production
c) The need to keep inefficient power plants on standby
d) All of the above
7. a) Design and explain advantages of non fossil fuel.
b) Suggest disadvantages of non fuel energy if any.
8. Evaluate different ways used to eradicate environment pollution inRwanda.