• UNIT 1:ATHLETICS

    Key unit competence: Perform throwing exercises in athletics
    1.1. Prerequisite (knowledge, skills, attitudes and values)
    Student teachers of year 3 will learn better throwing exercises in athletics if they
    have developed basic techniques of throws in Ordinary Level and have performed
    basic physical exercises.
    1.2. Cross-cutting issues to be addressed
    • Gender
    In teaching and learning process, the tutor must prepare and provide Athletics
    activities that engage both girls and boys equally in exploiting their full potential
    and talents in without any discrimination or prejudice.
    • Inclusive education
    The tutor as a facilitator he/she must consider different special education
    needs and select activities to adapt his teaching approaches to student
    teachers. This creates a positive attitude and helps all student teachers to
    participate actively and develop their competence levels.
    • Financial education
    The tutor should integrate Financial Education into his Athletics teaching/
    learning activities by providing the local and no cost teaching materials where
    is possible. He/she must encourage student teachers to make their own
    materials that can help them to develop competences not only in sport at
    school but also in their life.
    • Standardization culture
    The tutor must choose and select the standardized materials to use in his/her
    teaching/learning process of Athletics. It is necessary to provide appropriate
    materials required to the levels of student teachers and help them to develop
    culture of checking and using the quality of sport materials for the competitions
    before using them in order to prevent injuries and other cases of accident.
    • Environment and sustainability
    The tutor should provide materials and deliver the lesson by encouraging
    student teachers to protect the environment and well use of materials. The
    tutor helps them to develop the spirit of keeping safe the environment they
    use.
    • Peace and values education
    The tutor helps student teachers to develop fair play and social values by
    avoiding violence and conflict in the Athletics activities and by setting clear
    and relevant instructions. He/she should provide the activities that help
    student teachers to develop their competence peacefully.
    • Comprehensive sexuality education
    The tutor provides Athletics activities and sets instructions that prevent
    sexual harassment, any kind of gender-based violence like sexual abuse and
    physical contacts oriented to the sexuality intention.
    • Genocide studies
    While conducting Athletics exercises a tutor should take a time to explain
    student teachers how sports should be used to fight against Genocide
    ideology and how to prevent it. For example, to organize Genocide memorial
    tournaments at school and give the message related to the Genocide
    1.3. Guidance on introductory activity
    Before introducing the lesson one of this unit, you must introduce the whole unit.
    The tutor as a guide, facilitator and expert, asks questions and provides activities
    related to throwing exercises in athletics in order to help them to predict what to
    be learned in the whole unit.
    1.4. List of lessons/sub-heading
    m
    Lesson 1: Techniques of throwing javelin
    a) Learning objective
    Explain and perform techniques of throwing javelin
    b) Teaching resources
    Field/playground/throwing area, watch, whistle, decametre, javelin (for men
    and women).
    c) Prerequisites/Revision/Introduction
    Student teachers of year 3 will learn better techniques of throwing javelin in
    athletics if they have developed basic techniques of javelin throws in Ordinary
    Level and have performed basic physical exercises.
    d) Learning activities
    Opening discussions
    • Ask questions related to techniques of throwing javelin learned in ordinary
    level.
    • Let student teachers answer questions, support them where is necessary
    and introduce the new lesson.
    • Invite student teachers to start warm up exercises.
    Warm up exercises and cool down description
    • Let student teachers perform general warm up exercises and specific
    warm up based on the most used body’s parts to be used while performing
    techniques of javelin throwing and stretch their muscles properly. One
    student teacher leads warm up and stretching exercises.
    e) Lesson development
    Tutor starts the lesson by explaining student teachers that throwing javelin
    consist of the following phases:
    • The grip phase
    Explain student teachers that there are three types of grips in throwing javelin
    such as:
    i) The American grip:
    The thumb and the first two joints of the index finger are behind the cord.
    g
    ii) The Finnish grip:
    The thumb and the index finger are behind the cord, while the index finger
    supports the shaft. The extended finger assists the rotation of the javelin
    during delivery.
    iii) The V grip:
    The javelin is held between the index and middle fingers behind the cord.
    The position of the fingers assists the throwing arm in staying at shoulder
    height during the approach.
    Individually, let student teachers apply how to grip javelin by using three grip
    methods.
    During the approach run up phase, remind student teachers measure their
    strides as follow:
    To carry javelin at head height with their arms bent, their elbow pointing forward.
    –– That their palm of hand must face upwards to facilitate the wrist and
    shoulder to relax, and have an easy running movement.
    –– To keep their shoulder parallel to the run up.
    –– To keep their hip high with body weight carried on the ball of the foot.
    –– To have the javelin lined up approximatively parallel to the ground.
    –– To increase constantly to the maximum controllable speed.
    Let student teachers perform approach run individually. During practice of run up
    approach, remind to:
    –– Put a clear marker where five steps rhythm start to indicate student
    teacher’s the area.
    –– Tell student teachers continuing to increase constantly to the maximum
    controllable speed by avoiding lengthening the stride.
    Tell student teachers to do the following during approach run up and
    carry:
    –– Holding the javelin over the shoulder horizontally.
    –– Maintaining the top of javelin at head height.
    –– Holding the arm steadily with increasing running speed.
    –– Accelerating until reaching the optimum speed.
    Tell student teachers to do the following during stride rhythm and
    delivery:
    –– Execute the withdrawal action with impulse stride.
    –– Carry out delivery, transition, power position and final arm movement.
    –– Maintain the reserved legs.
    –– Bend the right legs and lowering the upper body.
    –– Swing the left leg backwards.
    –– Move the foot of the brace leg to the foul line.
    Remind student teachers to remember basics throwing principles for
    javelin throw:
    –– Involve the whole body.
    –– Achieve a summation of forces.
    –– Apply force in the direction of the throw.
    –– Achieve a long range of motion.
    –– Weight transfer.
    Let student teachers perform techniques of throwing javelin individually by
    making many trials in order to be familiarized with javelin throw, try to keep
    security while throwing by giving enough space to the thrower in order to avoid
    accidents.
    Application activity
    Let student teachers perform techniques of throwing javelin individually by
    respecting different phases and record their performance with evaluating their
    own progress. They can do this as a small competition. Remember to give
    enough space to the thrower in order to avoid possible accident, which may

    occur during throwing.

    Cool down exercises
    –– Let student teachers do light exercises and stretch their group of muscles
    by insisting on most used parts.
    –– Randomly, one of student teachers leads cool down exercises.
    –– Guide them while stretching their muscles systematically.
    –– Help them/demonstrate/correct where is necessary.
    Closing discussion
    Reflect
    –– What are challenges/ advantages did you face while performing exercises
    of javelin throw?
    –– How did you proceed to perform those exercises?
    Connect
    –– What are conditions do you need throws like javelin?
    Apply
    –– What is the usefulness of javelin throw?
    –– How will you use skills of javelin throw in your daily life?

    Lesson 2: Techniques of throwing discus
    a) Learning objective
    Explain and perform techniques of throwing discus
    b) Teaching resources
    Field/playground/throwing area, watch, whistle, decametre, discus (for men
    and women).
    c) Prerequisites/Revision/Introduction
    Student teachers of year 3 will learn better techniques of throwing discus in
    athletics if they have developed basic techniques of throwing discus in Ordinary
    Level and have performed basic physical exercises.
    d) Learning activities
    Opening discussions
    • Ask questions related to throwing of discus and their techniques learned in
    ordinary level.
    • Let student teachers present their findings and introduce the new lesson.
    • Invite student teachers to start warm up exercises.
    Warm up exercises and cool down description
    • Let student teachers perform general warm up exercises and specific
    warm up based on the most used body’s parts to be used while performing
    techniques of javelin throw and stretch their muscles properly.
    • One student teacher leads warm up and stretching exercises.
    e) Lesson development
    Step 1: Gripping the implement
    • Make preparation by holding the discus.
    • Face back to the throwing direction.
    • Bend knees slightly.
    • Keep the weight on the balls of the feet.

    • Keep arms nearly to the shoulder height.

    Step 2: Foot placement, power position, release and recovery
    • Make preparations with non-support.
    • Provide support and maintain momentum.
    • Deliver by the maintenance of power position (the right toe should clear
    past the left foot before the athlete starts the sprint to the middle. The left
    leg should stay low and fixed, ready to push off toward the front of the circle
    the left arm will remain inside the knee and with the shoulders level to help
    keep the body on balance) and acceleration.
    • Recover with changing legs quickly after the release.
    • Bend right leg and lower upper body.

    • Swing the left leg backwards and keep eyes look down.

    Remind student teachers that the influence on discus distance are the
    following:
    • Velocity of the discuss at release.
    • Angle of release.
    • Attitude angle or angle of tilt at the release.
    • Wind direction and velocity.
    Let student teachers perform techniques of throwing discus individually by
    making many trials in order to be familiarized with discus throw, try to keep
    security while throwing by giving enough space to the thrower in order to avoid

    accidents.

    Application activity
    Let student teachers perform techniques of throwing discus individually and
    record their performance with evaluating their own progress. They can do this
    as a small competition. Remember to give enough space to the thrower in

    order to avoid possible accident, which may occur during throwing.

    Cool down exercises
    –– Let student teachers do light exercises and stretch their group of muscles
    by insisting on most used parts.
    –– Randomly, one of student teachers leads cool down exercises.
    –– Guide them while stretching their muscles systematically.

    –– Help them/demonstrate/correct where is necessary.

    Closing discussion
    Reflect
    –– What are challenges/benefits did you face while performing exercises of
    discus throw?

    –– How did you proceed to perform those exercises?

    Connect

    –– In which conditions do you need throw like discus?

    Apply
    –– What is the usefulness of discus throw?

    –– How will you use skills of discus throw in your daily life?

    Lesson 3: Techniques of throwing shot put
    a) Learning objective
    Explain and perform techniques of shot putting
    b) Teaching resources
    Field/playground/throwing area, watch, whistle, decametre, shot put (for men
    and women).
    c) Prerequisites/Revision/Introduction
    Student teachers of year 3 will learn better techniques of shot putting in
    athletics if they have developed basic techniques of shot putting in Ordinary
    Level and have performed basic physical exercises.


    d) Learning activities
    Opening discussions
    • Ask questions related to techniques of shot putting learned in ordinary level.
    • Let student teachers present their findings and introduce the new lesson.
    • Invite student teachers to start warm up exercises.

    Warm up exercises and cool down description

    • Let student teachers perform general warm up exercises and specific warm
    up based on the most body’s parts to be used while performing techniques
    of short putting stretch their muscles properly.
    • One student teacher leads warm up and stretching exercises.

    e) Lesson development

    Explain student teachers that during shot putting the following steps are
    respected:
    1st step: Holding a shot put
    • Applying to grip the shot put.
    • Placing parallel fingers and slightly speed.

    2nd step: neck placement

    • Raise the shot above their head.
    • Push the shot into their neck.
    • Holding the shot on the front part of the neck.
    • Lift elbow parallel to the floor.
    • Check to see that their thumb is pointing down towards their clavicle.
    • The palm keep pointing towards the throwing direction.

    2nd step: Preparation

    • Carrying out start upright at the rear of the circle.
    • Back to the stop board.
    • Bend trunk forward parallel to the ground.
    • Supporting the leg bent.
    • Make free leg drawn towards the back of the circle.

    3rd step: Gliding

    • Gliding off the right/left foot to its heel.
    • Placing it in the centre.
    • Coordinate landing feet simultaneously.
    • Land left/right foot on the ball.
    • Maintain landing feet on the ground.

    4th step: Rotation/deliver/recovery

    • Execute preparation with non-support and maintain foot placement.
    • Deliver shot put with increasing power position, accelerate and make final
    arm movement.
    • Make recovery by changing legs quickly after the release by bending right
    leg, lowering upper body.
    • Swing the left/right leg backwards and keep eyes look down.

    Drills for shot putting

    • Drills used to teach the delivery
    Tell student teachers
    –– To stand facing the sector.
    –– To start with the shot above their head in their throwing hand.
    –– To flip the shot out of their hand.

    • Drills to teach throwing from power position

    Tell student teachers
    –– To face the sector with toes pointed straight.
    –– Place shot against the neck.
    –– To twist the body to the right and down.
    –– To bend the knees.
    –– To extend legs and hips then throw.

    • Drills used to teach the glide

    Tell student teachers
    –– To start in an athletic position with their right hand up against their neck
    and their left hand extended out in front.
    –– To let their hips fall past their heels.
    –– To pull their leg back underneath them.

    For left leg drive

    –– To start in glide position.
    –– To drive their left leg towards the toe boards close to the ground.
    –– To strengthen their right leg.
    –– To have a finished position with their legs in an upside down Y.

    • Shot putting styles
    There are two styles, which are currently used while shot put competition:
    The glide and the spin.
    –– The glide.
    –– The spin( rotational techniques).
    Let student teachers perform techniques of throwing shot put individually by
    making many trials in order to be familiarized with shot put throw, try to keep
    security while throwing by giving enough space to the thrower in order to avoid

    accidents.

    Application activity
    Let student teachers perform techniques of shot putting individually and record
    their performance to show and evaluate their own progress. They can do this
    activity in a small competition. Remember to give enough space to the thrower

    in order to avoid possible accident, which may occur during throwing.

    Cool down exercises
    –– Let student teachers do light exercises and stretch their group of muscles
    by insisting on most used parts.
    –– Randomly, one of student teachers leads cool down exercises.
    –– Guide them while stretching their muscles systematically.

    –– Help them/demonstrate/correct where is necessary.

    Closing discussion
    Reflect
    –– What are challenges/benefits did you face while performing exercises of
    shot putting?

    –– How did you proceed in order to perform techniques of those throws?

    Connect
    –– In which conditions do you need throws like shot putting?
    Apply
    –– What is the usefulness of shot putting?
    –– How will you use skills of shot putting in your daily life?

    1.5. Summary of the unit

    This unit comprises techniques of throwing javelin, discus and shot putting. It
    provides different exercises and activities that help student teachers to develop
    their competences basing on the explanations, demonstrations and facilitation of
    the tutor using the appropriate teaching and learning materials.

    1.6. Additional Information for tutors

    JAVELIN
    Steps of teaching throwing javelin
    Step 1 and 2

    –– To move throwing arm straight forward on landing on the right foot.
    –– To back to the rear, over the right shoulder until the arm is fully stretched
    at shoulder height with the palm of the throwing hand facing upwards.
    –– Not to rush the withdrawal to avoid sideways to long.
    –– To try to accelerate ahead of the javelin, rather than pushing the javelin
    back. This way, it will be easier to maintain the approach speed.
    –– The shoulders turn to be in line with delivery area, while the hips remain
    square with the delivery area, with the feet pointing forward, to maintain
    the approach speed, and to produce torsion in the upper body prior to
    the throw.
    –– The right leg must drive forwards and upwards to assist the hips to
    maintain their position, and to assist the left leg in maintaining approach
    speed.
    –– The javelin must remain pointing in the direction of the throw.

    Step 3
    As preparation for the subsequent drive step, remind student teachers to:
    –– Hold the javelin close to head with the point in line of the eyebrows. It
    must remain in this position until the final delivery action.
    –– The eyes look straight ahead.

    Step 4

    –– Flatter drive step of the right leg takes place after pushing off with the
    left leg.
    –– The trunk starts to lean back because of the long stride and this facilitates
    a long, final delivery pull of the throwing arm.
    –– The right foot is kept low while the right leg drive forward, across the left
    foot (the shortest possible path).
    –– The left leg, after completion of the drive, is brought forward, and is in
    front of the right leg before the right foot touches the ground.
    –– The right foot touches the ground ahead of the hips and shoulders, on
    the outside edge, heel first.
    –– The right leg is bending to absorb the shock.
    –– The right foot is placed on the line of throw to ensure that the eventual
    drive is directed through the hips and trunk.
    –– As the right foot lands, at the end of the “cross-step”, the heel is quickly
    lifted and rotates clockwise until the foot finishes up on the little toe, thus
    bringing about an clockwise rotation of the right knee and hip.
    –– The angle of the foot in relation to the line of throw should not be more
    than 45º, to ensure an active drive through the hips.
    –– The shoulders are still in line with the direction of the throw. The left arm
    is folded across the chest to keep the chest muscles relaxed.
    –– The right arm is stretched, with the wrist closed and the palm up, to
    prevent the tip of the javelin to lift. The tip of the javelin must still be in line
    with the eyebrows.

    Step 5

    –– The left leg is brought forward to bring the body in the power position.
    –– The right leg drives forward and upwards while waiting for the left foot to
    come down.
    During power position, tell student teachers that:
    –– The body is arched in the “power” position.
    –– The head faces the direction of throw.
    –– The shoulders and javelin are roughly parallel.
    –– The throwing hand is held high, palm facing upwards and the wrist closed.
    –– The left leg is well forward, held like a “wooden leg”.
    –– The left leg is totally extended.
    –– The right leg is slightly bent with the foot on the ground ahead of the hips
    and shoulders.

    During the throw phase, recommend student teachers that:

    –– With both feet on the ground, the right leg drives the right hip forward
    over an extended left leg in front.
    –– Turn the right hip quickly forward and up to bring it square with the
    delivery area. The chest and shoulders must follow in rapid succession.
    –– The right elbow will follow by rotating outwards and up, alongside the
    head, while the right shoulder is pulled through and the arm is “whipped
    over the shoulder” with a vigorous forward and upward extension.
    The “whipping” action should be a result of the hip / chest / shoulder
    movement, and not an action on its own. The delivery arm must start its
    final action when the hand is above the shoulder.
    –– Keep the left arm relaxed, next to the body and then remain firm (blocked)

    during the final thrust of the right side of the body. It must not be allowed

    to sweep too far backwards.
    –– The eyes look forward towards the point of the javelin to avoid the
    shoulders from turning.
    –– The launching takes place above the left foot. The outward rotation of
    the elbow along with the release of the fingers on the javelin causes the
    javelin to rotate clockwise to create stability during flight.

    During recovery phase, recommend student teachers to:

    –– Ride over the left leg after delivery, while keeping the left foot on the
    ground.
    –– Bring the right leg quickly forward, immediately after the release of the
    javelin to prevent fouling of the throw.
    –– Place the foot on the ground with the leg slightly bend to absorb the
    forward momentum.

    Delivery angle for throwing javelin

    The optimum delivery angle is 30 and 36º. The faster the javelin is thrown, the
    lower the trajectory will be. Strong headwinds require a lower delivery angle and
    strong tailwinds require an increased delivery angle. Javelins are manufactured
    according to distance rating. A thrower who throws 50 m requires a javelin, which
    flies optimally at 50 m, etc. The higher the distance rating of the javelin, the lower

    the angle of release.

    Rules for throwing javelin
    i) Implement

    The weight and length

    –– The javelin consists of three parts: a head, a shaft and a cord grip.
    –– The shaft must be constructed of metal and has, fixed to it, a metal head
    terminating in a sharp point.

    ii) The runway

    The length of the runway should not be more than 36.50 m but not less
    than 30 m and should be marked by two parallel lines, 50 mm in width and
    4 m apart.

    iii) The throwing arc

    This should consist of a strip made of paint, wood or metal 70 mm in width,
    painted white and flush with the ground, and should be an arc of a circle
    drawn with a radius of 8 m. Lines, 0.75 m in length, are drawn from the
    extremities of the arc at right angles to the parallel lines marking the runway.

    iv) Throwing sector/area

    This is bounded by the inner edges of two lines, which are drawn from the
    centre of the arc through the points at which the arc joins the lines marking

    the edge of the runway.

    General rules for throwing javelin
    –– The javelin must be held at the grip and the throw must be made over the
    shoulder or upper part of the throwing arm.
    –– For a throw to be valid, the tip of the metal head must strike the ground
    before any other part of the javelin and it must fall completely within the
    inner edges of the landing sector.
    –– The competitor must make his approach and throw within the lines
    demarcating the runway.
    –– It is a foul throw if, after starting his throw, he touches the lines or the
    ground outside with any part of his body.
    –– The athlete must not leave the runway until the javelin has landed and then
    his first contact with the parallel lines or the ground outside the runway
    must be completely behind the lines, at the ends of the arc at the right
    angles to the parallel lines.
    –– Once the athlete has started the throw, the athlete must not turn completely
    around so that the back is towards the throwing arc.
    –– The number of throws allowed is the same as for the shot and discus.

    THE SHOT PUT

    The shot is a metal ball of 7.26kg for men and 4kg for women. The aim is to put it
    as far as possible from a seven-foot diameter (2.135m) circle that has a curved

    10-centimetre high toe-board at the front.

    The following rules are adhered to for a legal throw:
    Competitors take their throw from inside a marked circle 2.135m in diameter,
    with a stop board approximately 10cm high at the front of the circle. The distance
    thrown is measured from the inside of the circumference of the circle to the
    nearest mark made in the ground by the falling shot, with distances rounded down
    to the nearest centimeter. Place the zero end of the tape at the mark made by the
    shot closest to the throwing circle, pull through to the center of the circle (should
    be a mark or hole, and read off the measurement where the tape crosses the
    inside edge of the circumference of the circle or toe board.
    –– Upon calling the athlete’s name, they have sixty seconds to commence the
    throwing motion.
    –– The athlete must rest the shot close to the neck, and keep it tight to the
    neck throughout the motion.
    –– The shot must be released above the height of the shoulder, using only
    one hand. The ball is to be put (i.e. pushed), not thrown with an overhead
    motion. At no time may the shot move behind the plane of the shoulders.
    –– The athlete may touch the inside surface of the circle or stop board, but
    must not touch the top or outside of the circle or stop board, or the ground
    beyond the circle. Limbs may however extend over the lines of the circle
    in the air.
    –– The shot must land in the legal sector (34.92°) of the throwing area (Inside
    of / not including the line.

    –– The athlete must exit the throwing circle from the back half of the circle.

    Foul throws occur when an athlete:
    –– Does not pause within the circle before beginning the throwing motion.
    –– Does not begin the throwing movement within sixty seconds of having his
    or her name called.
    –– Allows the shot to drop below his shoulder or outside the vertical plane of
    his shoulder during the put.
    –– During the throwing motion, touches, with any part of the body (including
    shoes): the top or ends of the stop board, the top of the iron ring, anywhere
    outside the circle.
    –– Throws a shot, which either falls outside the throwing sector or touches a
    sector line on the initial impact.
    –– Leaves the circle before the shot has landed.
    –– Does not exit from the rear half of the circle.

    The top eight throwers, once established, will have three more attempts in order

    of increasing distance. The final rankings will result from all 6 attempts. The
    competitor’s best throw from the allocated number of throws, typically three to
    six, is recorded, and the competitor who legally throws the shot the farthest is
    declared the winner. Ties are broken by determining which thrower has the longer
    second-best throw.

    DISCUS THROW

    The discus throw is an event in track and field athletics competition, in which an
    athlete throws a heavy disc called a discus in an attempt to mark a farther distance
    than his or her competitors. The men’s discus is a heavy lenticular disc with a
    weight of 2 kilograms and diameter of 22 centimetres, the women’s discus has a

    weight of 1 kilogram and diameter of 18 centimetres.

    –– The discus can be made of any material such as wood but it must have a
    circular edge with a metallic rim.
    –– Inner construction can be both solid and hollow.
    –– The cross section of the edge should be made in circular manner and it
    should have a radius of 6mm.
    –– All sides of the discus should be identical. They must be free from any type
    of sharp edges or irregularities.
    –– Finishing of the discus should be smooth.
    –– An athlete can only throw the discus when he or she will stand inside a
    circle, which has a diameter of 2.5m.
    –– During the course of throw, the athletes are prohibited from touching the
    top of the rim. However, they can touch the inner part of the rim.
    –– An athlete cannot touch the ground beyond the circle.
    –– If the athlete leaves the circle before the landing of the disc on the ground,
    then it will be considered as a foul throw.
    –– In the Olympic matches, each athlete is given eight chances to display
    their talents.
    –– There is particular boundary of landing of the disc. If the disc lands outside
    that zone then that throw is considered invalid.

    1.8. End unit assessment

    –– The tutor set series of athletic exercises on javelin, discus and shot put.
    –– He/she provides the appropriates materials to the student teachers and
    highlight instructions to follow during performing different throws. Student
    teachers must perform individually three trials for a) javelin throw b) discus
    throw c) shot putting.
    –– The tutor observe how student teacher is performing by respecting rules.
    The tutor records the performance of each student teacher to evaluate their
    performance.

    1.8. Additional activities

    1.8.1. Remedial activities

    Individually, the student teachers revise the techniques of javelin, discus and shot
    put.

    1.8.2. Consolidation activities

    The tutor organize a kind of competition where student teachers compete
    individually in throwing javelin, discuss and shot putting. Record their performance
    and rank them based on each discipline.

    1.8.3. Extended activities

    Encourages and facilitates student teachers to participate in different athletics
    competitions on javelin, discus and shot put organized by the school, Sector,

    district, league and National school sports federation.

    UNIT 2:FOOTBALL